Sectional Inspection Chamber
Internal dimensions: 915mm x 685mm with 300mm silt capacity
Modules: 150mm (63kg), 180mm (73kg), 225mm (93kg), 300mm (125kg)
suitable for pipes up to 380mm OD
Approximate weight with no lid: 320kg
Machine-made reinforced concrete sections to B.S.5911 part 2, that can be easily and quickly assembled to form chambers of varying depths. The basic chamber consists of a base frame with insert; a bottom section 180mm deep with a rebate on the top edge only; and a 300mm deep section with knock-out webs which will accommodate pipe sizes up to 180mm o.d. For larger pipe sizes either a 180mm or 300mm deep section with knock-out webs is added. Plain extension sections are available where it is required to have access to the chamber at ground level. There is a range of lids and cover slabs available.
Sub-surface lid
Approximate weight with no lid: 120kg.
65mm reinforced concrete frame with circular removable lid. Designed to have at least 560mm of cover under normal agricultural situations. Suitable for pedestrian use at ground level.
Removable steel lid
Approximate weight: 165kg.
Steel frame is cast into a strongly reinforced concrete surround 100mm thick into which a standard galvanized 17 tonne GVW pressed steel manhole lid is fitted.
Heavy duty concrete lid
Approximate weight: 270kg.
The 180mm deep concrete lid frame is designed to provide a full size clear opening. The two 125mm thick lids locate neatly in the frame and can only be removed with the proper lifting keys. Designed for use at ground level where normal farm traffic conditions exit. Where constant traffic is expected, the frame should be bedded on mortar and surround with concrete.
Playing field top
Approximate weight: 160kg.
Where ground level access to an inspection chamber is required on a playing field, it is desirable to minimize the amount of concrete exposed at the playing surface. The J.K.H. playing field top is a 100mm think reinforced concrete cover slab with a 460mm x 600mm opening cast through. To achieve the required finished level, bricks are mortared around the opening and the lid is then fitted on top.
Surface water top
Approximate weight: 200kg.
The 100mm thick lid frame has a 405mm x 305mm opening cast through into which a removable galvanized steel trash box and grating are fitted. This enables surface water to be safely removed into a piped drain.
Note
With a newly installed under-drainage system, the maximum amount of silting-up is known to occur during the first 9 months or so. Therefore, ideally final backfilling should be delayed so that the chamber can be inspected during this period.
